Your pipes don’t care that you forgot about them.
That’s not a threat, it’s just plumbing. The system behind your walls works every day, quietly, and almost everything that eventually becomes a four-figure emergency starts as a ten-minute maintenance item that nobody got around to. Plumbing maintenance isn’t glamorous. Neither is a tetanus shot. Both are considerably better than the alternative.
This guide is the whole routine in one place: the annual checklist, the Pacific Northwest seasonal calendar, and the local knowledge — older homes, big trees, soft water, wet winters — that decides what actually matters in a Seattle-area house. An hour or two a year. That’s the deal.
The Annual Home Plumbing Checklist
Do these once a year, ideally in the fall before the cold arrives. Check them off and your plumbing will out-behave most of the neighborhood.
Water heater
- Flush the tank to clear sediment (the single highest-value item on this list)
- Test the temperature-and-pressure relief valve
- Check the anode rod every 3 to 5 years
- Confirm the temperature is set to 120°F
- Look at the base and fittings for any sign of moisture
Full detail in the water heater guide.
Valves and supply
- Find and test the main shut-off — it should turn without a fight
- Test the shut-off under every sink and behind every toilet
- Look under every sink for moisture, swelling, or that musty smell
- Check washing machine hoses for bulges and cracks (rubber hoses are a top cause of household floods; braided steel is the upgrade)
- Inspect the water pressure if you can — above 80 psi quietly destroys appliances and fixtures
Drains and sewer
- Run water in rarely used drains for a minute (guest baths, floor drains) to refill the traps that keep sewer gas out
- Clean stoppers and screens of hair and buildup
- Note anything draining slower than last year — trends are information
- If you have big trees and an older line, ask whether your sewer line is due for a cleaning or a camera look (see the sewer line guide)
- If your home is on a septic system, stay on schedule: most systems need pumping every 3 to 5 years, and a septic backup makes a sewer backup look polite
Fixtures
- Food-coloring test in every toilet tank for silent leaks
- Check around toilet bases for softness or moisture
- Soak clogged aerators and showerheads in vinegar
- Look at caulk and grout lines in tubs and showers — failed seals are how water gets into walls
Full detail in the fixture guide.
The Pacific Northwest Seasonal Calendar
Fall (the big one). Disconnect and drain outdoor hoses before the first freeze — a hose left connected can freeze the faucet and split the pipe inside the wall, and you won’t find out until spring. Insulate exposed pipes in crawlspaces, garages, and exterior walls. Know where your main shut-off is before you need it at 2 AM. Get the water heater flushed and the furnace-side plumbing looked at while you’re at it.
Winter. During a real cold snap (the PNW gets a few a year, and our housing stock isn’t built like Minnesota’s), open cabinet doors under sinks on exterior walls, let vulnerable faucets drip slowly, and keep the heat on even when traveling. If a pipe does freeze, shut off the water before it thaws — a frozen pipe often announces the crack only when the ice lets go. The home plumbing guide has the full burst-pipe playbook.
Spring. Check for winter’s damage: hose bibs that leak only when used (the classic split-pipe signature), soggy yard spots over the sewer line, and your water meter’s leak indicator after a no-use window. Heavy spring rain is also when marginal sewer lines confess — a backup that only happens in storms is a cracked line taking on groundwater.
Summer. The season of guests, laundry, and irrigation. Watch the water bill for unexplained climbs (a running toilet hosting its own summer program), and give the garbage disposal a rest from cookout duty it wasn’t built for: bones, grease, and corn husks belong in the trash.
Seattle’s Climate and Your Plumbing
Our weather is gentle on pipes in some ways and sneaky in others. Mild temperatures mean fewer deep freezes than the Midwest, but the cold snaps we do get catch homes that were never insulated for them. The rain matters more: saturated soil shifts, tree roots thrive, and old sewer joints take on groundwater. A house here can go decades without a plumbing emergency and then have a very educational winter. Maintenance is how you skip the education.
Older Seattle Homes: The Honest Version
A huge share of Seattle-area homes were built before 1970, and their plumbing has era-specific personalities:
- Galvanized supply pipes corrode from the inside, narrowing until pressure fades and water runs rusty after vacations. If your pressure has been declining for years, this is the likely story, and repiping is the ending.
- Clay sewer lines with joints every few feet are root magnets. They can serve for decades and then need regular attention (see the sewer guide).
- Cast iron drains corrode and scale inside, catching debris.
- Mixed-era repairs mean your house may have three generations of pipe in one wall. That’s normal here. It just means diagnosis should look, not assume.
None of this makes an older home a bad home. It makes maintenance a better investment in one. Knowing what your house is made of is the difference between a plan and a surprise.
A Word About Water Quality
Seattle’s water is famously soft — it comes from protected mountain watersheds and is gentle on fixtures and water heaters compared to hard-water cities. Good news, with two footnotes. First, soft water doesn’t prevent sediment in a water heater tank; flushing still matters. Second, homes on the edges of the region, and some on wells, can have noticeably harder water: watch for white scale on fixtures, spots on glassware, and stiff laundry, and if that’s your house, a softener conversation is worth having. Either way, if your water changes — color, taste, smell — suddenly, that’s information. Call the utility if the whole street has it, and call us if it’s just you.
The Maintenance Mindset (or: Why We Obsess)
Here’s what years of emergency calls teach you: disasters have biographies. The burst pipe had a cold snap and an uninsulated crawlspace. The sewer backup had three years of “it drains a little slow.” The remodel had a drip that got six months to work.
We obsess over seals, fittings, pressure, and installation details, the stuff nobody sees behind the wall, because that’s where the biographies get written. Maintenance is just reading the early chapters on purpose. An hour a year, a checklist, and a plumber who’ll tell you the truth about what’s fine and what’s coming due. That’s the entire secret, and it isn’t really a secret.
When to Call Pinky’s
For the things on this list you’d rather hand off — water heater flushing, valve replacements, sewer cleanings, septic pumping, pressure problems, and the “something seems off” investigations — call 206-316-8876. Pinky’s serves King, Snohomish, and Pierce counties, and a maintenance visit is the cheapest appointment we sell, because it’s the one that prevents the expensive ones.
Want the whole system looked over? Start with our services page or request an estimate, and bring this checklist. We’ll go through it with you, tell you what’s healthy, what to watch, and what’s due, in that order, in plain English.
Save our number before things get weird: 206-316-8876.
Frequently Asked Questions
How often should I have my plumbing inspected?
For most homes, a professional once-over every 1 to 2 years makes sense, with your own annual checklist in between. Older homes, homes with big trees over the sewer line, and homes with any history of leaks or backups belong on the yearly plan.
What is the most important plumbing maintenance task?
Flushing the water heater, by a wide margin: it protects the single most expensive appliance in the system. Runner-up: knowing your main shut-off works. One protects your wallet slowly; the other protects it all at once.
How do I prepare my plumbing for a Pacific Northwest winter?
Disconnect hoses, insulate exposed pipes in unheated spaces, confirm your shut-off works, and during cold snaps open sink cabinets on exterior walls and drip vulnerable faucets. Most freeze damage here happens in a handful of cold nights, not a long deep freeze.
Does Seattle’s soft water mean I can skip maintenance?
It means your fixtures and heater face less mineral scale than most of the country. It does not stop sediment buildup, anode rod consumption, valve seizing, or root intrusion. Softer water buys you time, not immunity.
When does a septic system need pumping?
Most household systems need pumping every 3 to 5 years, depending on tank size and household size. Skipping it lets solids reach the drain field, and drain field failure is one of the most expensive plumbing events a homeowner can meet.
My house is 80 years old. Where do I start?
With knowledge: what your supply pipes and sewer line are made of, how old the water heater is, and whether the shut-offs work. A single inspection visit can answer all of it and turn “old house anxiety” into a short, honest list.
Keep Reading
- Seattle Homeowner’s Guide to Winter Plumbing Maintenance (supporting article, publishing soon)
- Your Annual Home Plumbing Maintenance Checklist (supporting article, publishing soon)
- The Complete Water Heater Guide
- The Complete Sewer Line Guide
- All Pinky’s Plumbing Services
- How Seattle’s Rainy Weather Can Affect Your Home’s Plumbing
- Should You Have Your Plumbing Inspected Before Buying a Home in Seattle?
